This permit is required for the demolition of any existing structure and the associated debris removal, and will be issued on the same day. Inspection for same needs to be called in, once the site is ready before the demolition takes place.
Project Application must be completed. For additional instructions, refer to
Demolition Permit Requirements and/or
Along with standard
Permit Affidavit (if owner applying), this type of permit requires the submittal of two (2) sets of
electrical plans, manufacturer specifications and
The manufacturer of the electric shutter and the product approval must be
readily available to the Construction Inspector in the field.
Foundation Stabilization permits are required when the foundation of a property is compromised. Along with the standard
a signed and sealed Engineering report will be needed, if permit request is for
underpinning. If installing piers, submit two (2) sets of signed and sealed building plans.
Along with standard
Project Application, this type of permit requires manufacturer
specification and product approval. This information needs to be readily
available for the inspector in the field.
House to be moved shall be relocated in accordance with the approved construction documents, and any changes made during construction that are not in compliance with the approved construction documents shall be resubmitted for approval as an amended set of construction documents. Two (2) sets of signed and sealed plans,
two (2) sets of site plans, (1) sealed topographic survey, and the
must to be submitted for approval.
Seawall & Docks
This type of permit will be issue, to ensure that seawalls and/or docks are properly constructed, and design to ensure compliance with the City of Tampa Flood Damage Control requirements for a velocity zone. Along with the standard
Project Application, a signed and sealed survey will be needed showing seawall location; wall section showing structural details, will also be required. An engineer or architect’s certification must be provided indicating compliance with the City of Tampa
code. Approval from
Tampa Port Authority or
Hillsborough County EPC is required, before submittal.
State Sealed Modular
Customers are to include two (2) sets of signed and sealed building plans and two
(2) sets of site plans. Plans are to be approved by the
Department of Community Affairs before submittal. The proposed modular unit shall be installed and inspected in accordance with the manufacturer’s instruction.
Window-Door Replacement (Different Size)
Along with the standard
Project Application, this type of permit requires the submittal of two sets of signed and sealed building plans, product approval and
Permit Affidavit (if owner is applying for permit).
All information must be readily available for the inspector in the field.
If the replacement size is the same, please see
Express Permit information.